Media

Keymount Fitment Guide for Dead Air Products

Comments: 48

comments

February 04, 2020 at 3:46 pm, william Mayer said:

Can I use the Micro Brake to instal the PYRO Muzzle Brake with a PYRO Blast sleeve installed

Reply

February 05, 2020 at 1:44 pm, Media Admin said:

Yes, you can!

Reply

February 04, 2020 at 8:54 pm, Randy Renken said:

Will these work with the Gunwerks suppressors? I have a gunwerks 6ix, and just ordered a Nomad L. Hoping I can find a mount/brake system to work with both.

Thanks

Reply

February 05, 2020 at 1:44 pm, Media Admin said:

You will need to call Gunwerks to see if they have the same back thread pitch as our Nomad series.

Reply

February 12, 2020 at 9:08 am, Troy said:

Will you be offering the Micro Brake/F.H. in 13.5 x 1 LH for Wolfman? If so when do you expect it to be available?

Thanks,

Reply

February 27, 2020 at 2:41 pm, Media Admin said:

We will in the future but have no ETA of when it will be released.

Reply

February 21, 2020 at 6:42 pm, Eric Slawson said:

Will the Micro Brake work with my Sandman L

Reply

February 27, 2020 at 2:41 pm, Media Admin said:

Yes it will with no issues!

Reply

July 24, 2020 at 8:26 pm, Dan Kusek said:

Micro brake will work with Sandman K correct?

Reply

August 04, 2020 at 6:28 pm, Media Admin said:

Yes, it will!

Reply

February 26, 2020 at 10:24 pm, Joseph K. said:

Will the Keymicro fit the SilencerCo Omega 9K?

Reply

February 27, 2020 at 2:41 pm, Media Admin said:

Unfortunately it will not. We will have something for this in the future but we have no ETA right now on this time.

Reply

March 01, 2020 at 6:24 pm, Jeff W said:

What is the size and thread pitch of the Keymicro?

Reply

April 29, 2020 at 8:27 pm, Media Admin said:

The suppressor interface threads on the KeyMicro are 1.2031-28.

Reply

March 16, 2020 at 10:21 pm, Freeblazin said:

Just confirming that the Ghost-M paired with the KeyMicro will not work with the Keymount FH, only the MicroBrake?

Reply

April 30, 2020 at 6:58 pm, Media Admin said:

Correct you can only use the Key-Micro with the Ghost-M

Reply

April 22, 2020 at 5:42 pm, Grant said:

Can the Wolfman handle super sonics mounted to a flash hider or must it be the key micro brake?

Reply

April 30, 2020 at 6:56 pm, Media Admin said:

It must be the Key-Micro Brake

Reply

April 28, 2020 at 10:10 pm, Josh said:

Can I install at 14x1LH flash hider on my C39V2 and then use my Nomad fitted with a Keymo?

Reply

April 30, 2020 at 6:58 pm, Media Admin said:

Yes you can as long as you check to make sure the threads are concentric to the bore and use an alignment rod to test.

Reply

May 08, 2020 at 2:25 am, andrew densmore said:

If possible, will you guys make a micro brake type keymo mount for .45 (.578-28)? PRETTY PLEASE!

Reply

June 19, 2020 at 3:07 pm, Media Admin said:

We don’t currently have plans to manufacture that size, but we are always trying to widen the compatibility of our products. Stay tuned to our newsletter and social media for any announcements regarding new products!

Reply

May 19, 2020 at 6:48 pm, Olin Fredrickson said:

I just want to buy the whole set up for my Canik TP9SFX, and I don’t know how to go about it

Reply

June 19, 2020 at 3:07 pm, Media Admin said:

Depending on the suppressor you have, you will need a 1/2×28 piston and a booster assembly to get your Canik running.

Reply

May 29, 2020 at 10:32 am, Darrin Badger said:

I just received your Wolfman suppressor and I am excited to mount it. I have 2 Sig Sauer pistols I would like to move the suppressor between.

1) Sig MCX
2) Sig MPX

I would like to utilize both subsonic and supersonic rounds.

Can you help me?

Thank you,
Darrin

Reply

June 19, 2020 at 3:26 pm, Media Admin said:

For your MPX we would recommend a 13.5x1LH fixed mount (DA414). On your MCX, we do require supersonic rifle calibers to be mounted on the Micro Brake (DA409) using the Key Micro Adapter (DA451).

Reply

June 03, 2020 at 3:30 pm, JACOB R GRESS said:

Does the flash hider work for the Wolfman on a .556

Reply

June 19, 2020 at 3:08 pm, Media Admin said:

We require the Wolfman to be mounted on a Micro Brake when used with supersonic 5.56. The flash hider will work for subsonic 5.56.

Reply

June 16, 2020 at 4:15 pm, Charles Stonex said:

Will the Keymo mount fit my SilencerCo Harvester and the Nomad L I have on hold?

Reply

June 19, 2020 at 3:08 pm, Media Admin said:

The Nomad /Omega model (DA428) will fit both of these!

Reply

June 21, 2020 at 4:02 pm, Andrew Loew said:

I just purchased the Dead Air KeyMicro Adapter will this work for the nomad 30 with micro brake ?

Reply

July 21, 2020 at 3:28 pm, Media Admin said:

The Key Micro Adapter will not work with the Nomad. You need the Nomad/Omega Keymo (DA428) for the Nomad, which can then mount on any of our muzzle devices, including the Micro Brake.

Reply

July 31, 2020 at 7:38 pm, PB said:

Is the Key Mo adapter considered an NFA item? Does it need to be shipped to an FFL/SOT?

Reply

August 04, 2020 at 6:29 pm, Media Admin said:

No it is not. This can ship to a residential address.

Reply

June 24, 2020 at 9:00 am, Coy Hile said:

Is it necessary or recommended to use rocksett when installing the muzzle device onto the barrel as one does with e.g. Surefire muzzle devices?

Reply

July 21, 2020 at 3:28 pm, Media Admin said:

We recommend using Rocksett and torquing to 25-30 ft/lbs.

Reply

June 27, 2020 at 9:11 pm, Ceasar said:

Will da306 fit onto an ar platform, or will I have issues?

Reply

July 21, 2020 at 3:28 pm, Media Admin said:

It is ideal to use the regular flash hider (DA301) for an AR platform.

Reply

July 01, 2020 at 12:25 am, Michael said:

Will the Keymo Micro work with a SiCo Hybrid 46?

Reply

July 21, 2020 at 3:28 pm, Media Admin said:

No, it will not. You need the Nomad/Omega Keymo (DA428) for the Hybrid 46.

Reply

July 15, 2020 at 7:42 pm, Darrin said:

I have a Sig MCX that is .223 caliber. I am told I need the microbrake with the correct adapter that is Sig’s left hand thread.

When will you guys have the correct adapters to mount my Wolfman?

Reply

July 21, 2020 at 3:27 pm, Media Admin said:

Coming soon! Stay tuned to social media and our newsletter for any announcements related to new products.

Reply

July 31, 2020 at 6:50 pm, Brent Chambers said:

What is the outer thread pitch of the KEYMO adapter?

Also, I’m confused on when to use the FH vs Brake vs Micro-Brake.

What should I use with 5.56?

What about 300BLK supersonic?

Reply

August 04, 2020 at 6:29 pm, Media Admin said:

Which version are you looking to get?

Reply

August 06, 2020 at 6:42 pm, E-Rock said:

Is it just me, or does no one make a wrench that fits the KeyMo Omega? It seems the SiCo wrench (or 2 of them) would work, but I can’t find one anywhere. Time to break out the 3D printer?

Reply

August 11, 2020 at 1:34 pm, Media Admin said:

We are currently in the process of manufacturing spanner wrenches for the Keymo and will have them up for sale soon!

Reply

August 08, 2020 at 3:44 pm, Andy said:

Hello will the Keymo adapter works w the YHM Resonator K and Dead Air’s 3 prong flash hider ?

Reply

August 11, 2020 at 1:34 pm, Media Admin said:

The Omega / Nomad Keymo (DA428) and flash hider combo will work on the YHM Resonator K.

Reply

Leave a Comment

Leave a Reply